Services

Maintenance and tune-ups

Good maintenance is mostly measurement. A tune-up should leave you with readings that show how the system is doing, not just a sticker on the unit.

A technician in glasses and a cap inspects an evaporator coil lit up inside a hallway equipment closet.

Why maintenance matters

  • Dirty coils and filters reduce capacity and raise energy use.
  • Weak capacitors and loose connections fail on the hottest and coldest days.
  • Clogged condensate drains cause water damage and shut systems down.
  • Many manufacturers expect regular maintenance as a condition of their warranty. Check your equipment’s terms.

How often

Most homes do well with one visit before the cooling season and one before the heating season. Heat pumps, which do both jobs, benefit from both visits.

Filters are different. Check them monthly and replace them when they look dirty, typically every one to three months depending on the filter type, pets, and dust.

What maintenance can’t do

Maintenance reduces the chance of a breakdown and catches wear early. It doesn’t make an aging system new, and it doesn’t replace repair when something has already failed. If a tune-up turns up a problem, we’ll explain it and leave the decision to you.

Close-up of a digital refrigerant gauge set hanging on an outdoor unit, its hoses connected to the service ports.
Refrigerant pressures and temperatures are recorded at each visit, so changes over time are easy to spot.

What to expect

What a tune-up includes

Cooling visits are best scheduled in spring and heating visits in fall, before the system is under heavy load.

  1. Clean

    Outdoor coil rinsed, indoor coil and blower inspected, filter checked or replaced, condensate drain cleared and flushed.

  2. Inspect

    Electrical connections tightened, capacitors and contactors tested, motors checked for current draw and wear.

  3. Measure

    Refrigerant pressures, superheat or subcooling, temperature split, and for furnaces, combustion and safety controls.

  4. Report

    What we found, what is wearing, and anything worth planning for, so there are fewer surprises later.

Services

Other services

  1. AC Repair

    Warm air from the vents, short cycling, ice on the lines, or an outdoor unit that won’t start. We test the electrical and refrigerant sides before recommending a repair.

  2. Heating & Furnace Service

    Furnaces that won’t light, won’t stay lit, or can’t keep up on cold mornings, with gas, venting, and safety controls checked as part of the visit.

  3. HVAC Installation

    When repair no longer makes sense, we walk through the options and install new equipment properly: lines evacuated, connections tested, startup checked.

  4. Second Opinions

    Been told you need a new system? We’ll take an independent look and tell you what we see, including when a repair is the better choice.

When it stops working, call.

Tell us what the system is doing. We’ll tell you what we think is happening and what a visit involves.

Service area
Irving, Las Colinas, Coppell, Farmers Branch, Grand Prairie, Euless, Bedford, Grapevine
Call now Contact